Since LAN traffic can often generate a high number of packets, it is recommended that you use rules to filter out unnecessary packets. This can considerably reduce the amount of system resources consumed by the program. If you want to enable/disable a rule, select the appropriate branch on the left side of the window (e.g. IP Addresses or Ports), and check or uncheck the box describing the rule (Enable IP Address rules or Enable port rules). On the main screen of BAS-o-matic there is a drop down list that lists the available number of network cards on your computer. Click on that drop down list and select the correct network card that is connected to the network that you wish to capture traffic from. It is possible that your machine has multiple cards and you have not chosen the right Network Interface Card.Also check that you do not have any filters activated.
Comments